Filter
Top Products
Display message Cause & Remedy
When trying to store an item in the directory, the
directory memory is full. To erase other items
from the directory, see page 41.
A handset button was pressed while the handset
was on the base unit or the charger. Lift the
handset and press the button again.
The called handset has not been registered to
the base unit or you selected your extension
number.
The handset you tried to make a call has not
been registered to the base unit. Register it
(p. 63, steps 5 and 6).
• 3 handsets have already been registered to the
base unit. To cancel another handset
registration, see page 62.
• This base unit has the memory of the handset
currently registered to another base unit. Erase
the handset memory from the base unit.
For KX-TG2382B/KX-TG2382PW/KX-TG2383S
base unit:
(1)
Press and hold
HANDSET LOCATOR/INTERCOM (ALL) until
the CHARGE indicator flashes.
(2) Press and hold
HANDSET LOCATOR/INTERCOM ((1) to (3))
of the handset number that you want to erase
until the CHARGE indicator flashes, then
rapidly flashes, then goes out.
65
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Directory full
Invalid.
Please register
to the base.
All handsets
registered.
Maximum is 3.
Please lift up
and try again.
Invalid