Filter
Top Products
T
Tom Jones
Tom Jo
Tom
To
38
Selecting characters to enter names
The handset dialing buttons ((0) to (9)) can be used to enter letters and
symbols. The letters are printed on the dialing buttons. Pressing each
button selects a character as shown below.
0
Blank
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(0)
1234567891011
#&’ ( ) , –. /1
abcABC2
def DEF3
ghi GHI 4
jklJKL5
mnoMNO6
pqr sPQRS7
tuvTUV8
wxyzWXYZ9
Number of times key is pressed
Keys
Ü
á
Moves the cursor to the left.
Moves the cursor to the right. (To enter another character using
the same number key, move the cursor to the next space.)
For example, to enter “Tom Jones”:
1. Press (8) four times.
2. Press (6) three times, then press á.
3. Press
(6) once, then press á twice.
4. Press
(5) four times, press (6) three times,
then press á.
5. Press (6) twice, press (3) twice, then
press (7) four times.
Directory
•If a pause is required for dialing, (PAUSE/REDIAL) can be stored in a phone
number counting as one digit in step 5.
•You can exit the programming mode any time by pressing (OFF)
.
•If the display shows “Directory full” in step 2, the display will return to step
1, press (OFF) to exit the programming mode. To erase other stored items from
the directory, see page 41.
(HOLD/INTERCOM/CLEAR) erases characters.