Filter
Top Products
42
Intercom
A 2-way intercom is possible between the handset and the base unit or
between two handsets. You can call all handsets from the base unit at
once.
Page the desired unit(s) by entering the extension number, shown in the
top right of each handset’s display (p. 10). The base unit’s extension
number is 0.
Making Intercom Calls
Handset
1
Press (HOLD/INTERCOM/CLEAR).
2
To page the base unit, press (0).
•The base unit will ring for 1 minute.
To page another handset,
press (HOLD/INTERCOM/CLEAR), and enter
the extension number using the dialing
button ((1) to (3)).
•The destination handset will ring for 1 minute.
•To stop paging, press (OFF).
3
When the paged party answers, talk into the
handset.
•You can switch to the speaker by pressing .
To switch back to the receiver, press .
4
To end the intercom, press (OFF).
Ex. Calling Handset 2
Press
handset#[1-3]
or [0] for base
Calling [0]
Calling [2]
Intercom
00-00-03
Off
00-00-50
Base unit
Using this feature, you can also locate a misplaced handset.
1
To page the handset, enter the extension number, using the
HANDSET LOCATOR/INTERCOM ((1) to (3)).
•The IN USE/HOLD indicator flashes.
•The handset will ring for 1 minute.
•To stop paging, press HANDSET LOCATOR/INTERCOM ((ALL) or (1) to (3)).
2
When the paged party answers, talk into the MIC.
3
To end the intercom, press HANDSET LOCATOR/INTERCOM (ALL).