Filter
Top Products
63
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit of
the same model, you need to register it to that base unit. The handset will be
given a new extension number of that base unit. Only one handset can be
registered at a time. Make sure the base unit and the other handsets are not
being used. Registration must be completed within 1 minute.
1
Handset: Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Ö or
Ñ, and press á.
3
Scroll to “HS register” by pressing Ö or
Ñ, and press á.
4
Press á at “Registration”.
5
Base unit:
Press and hold
HANDSET LOCATOR/INTERCOM (ALL)
until the CHARGE indicator flashes.
6
Handset:
#Press á.
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number “[1]
”
to “[3]” is shown on
the top right of the display.
•You can stop registration by pressing (OFF) on the handset and pressing
HANDSET LOCATOR/INTERCOM (ALL) on the base unit.
If you have canceled the handset registration at the previous base unit
(p. 62), start from step 5.
If you have not canceled the handset registration at the previous base unit
(p. 62), the handset number still remains on that base unit memory. Erase the
handset number from the previous base unit. For KX-TG2382B/KX-TG2382PW/
KX-TG2383S base unit:
(1) Press and hold HANDSET LOCATOR/INTERCOM
(ALL) until the CHARGE indicator flashes. (2) Press and hold HANDSET
LOCATOR/INTERCOM ((1) to (3)) of the handset number that you want to erase
until the CHARGE indicator flashes, then rapidly flashes, then goes out
.
Date and time
H
Initial set
--------------
Set answering
H
HS register
--------------
--------------
H
Registration
Deregistration
Press [ALL] on
base for 3 sec,
then press [
H
].
Handset
Registering
Handset [3]
Registered
Ex. Extension number 3