Filter
Top Products
Useful Information
46
Making/answering calls, intercom
Problem Cause/solution
w is flashing. L The handset is not registered to the base unit.
Register it (page 26).
L The handset is too far from the base unit.
Move closer.
L The base unit’s AC adaptor is not connected.
Check the connections.
L You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
Noise is heard, sound cuts in
and out.
L You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL (JetStream) service,
we recommend that you contact your
DSL/ADSL service provider to have a
DSL/ADSL Splitter installed. We do not
recommend the use of generic DSL/ADSL
filters. Contact your DSL/ADSL service
provider for details.
The handset does not ring. L The ringer volume is turned off. Adjust ringer
volume (page 23).
The base unit does not ring. L The ringer volume is turned off. Adjust ringer
volume (page 17).
I cannot make a call. L The handset is too far from the base unit.
Move closer and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used by another
handset. Wait and try again later.
L If you are using a BT double adaptor to
connect the unit, remove the adaptor and
connect the unit to the phone wall socket
directly. If the unit operates properly, check or
replace the adaptor.
L The key lock feature is turned on. Turn it off
(page 19).
L The unit is not designed to be used with
rotary/pulse dialling services.
TG7341NZ(e).book Page 46 Wednesday, September 3, 2008 11:37 AM