Filter
Top Products
Intercom/Locator
40
Conference calls
The handset and base unit, or 2
handsets can have a conference call
with an outside party.
The following 2 methods are available:
– Another person presses {C} on the
handset or {s} on the base unit while
one person is talking with an outside
party (“Call share”, page 18).
– One person pages another person
during an outside call as follows.
1 During an outside call, press {INT}
to put the call on hold.
2 To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {INT} to return to
the outside call.
4 To establish a conference call, press
{3}.
L To leave the conference, press
{ih}. The other parties can
continue the conversation.
1 During an outside call, press {x} to
put the call on hold.
2 To page a specific handset, enter the
handset number.
To page all handsets, press {0}.
L When you page all handsets, only
the handset user who answers
first can take the transferred call.
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {x} to return to the
outside call.
4 To establish a conference call, press
{3}.
L To leave the conference, press
{s}. The other parties can
continue the conversation.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit:
Press {x} and wait for a few
seconds.
L All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press {x}.
Handset:
Press {INT}, then press {ih}.
Note:
L Even when the ringer volume for
outside calls is set to off (page 23), the
handset rings at a high level for
paging.
Handset
Base unit
TG7341NZ(e).book Page 40 Wednesday, September 3, 2008 11:37 AM