Filter
Top Products
Base unit speed dial
22
Base unit speed dial
You can assign one phone number to
each of the 10 dial keys ({0} – {9}) on
the base unit.
Adding phone numbers to
speed dial
Important:
L Before adding phone numbers, make
sure the base unit is not in use.
1 {l}
L The in use indicator flashes.
2 Enter the phone number (24 digits
max.).
L If a pause is required for dialling,
press {P} where needed (page
16).
L If you enter incorrectly, continue
and finish step 4, then start again
from step 1.
3 {l}
4 Press a dial key ({0} – {9}).
L A long beep is heard and the in
use indicator stops flashing.
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be
erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
To erase a stored phone number
1 {l} 2 times
2 Press the desired dial key ({0} –
{9}).
Making a call using the speed
dial keys
1
{s} i {l}
2 Press the desired dial key ({0} –
{9}).
Note:
L Speed dial numbers can only be
dialled from the base unit.
TG7341NZ(e).book Page 22 Wednesday, September 3, 2008 11:37 AM