Filter
Top Products
Intercom/Locator
38
Intercom
Intercom calls can be made:
– between handsets.
– between the handset and base unit.
Note:
L If you receive an outside call while
talking on the intercom, you hear
interrupt tones.
– To answer the call with the handset,
press {ih }, then press {C}.
– To answer the call with the base
unit, press {s} 2 times.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1
{INT}
2 To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
L To stop paging, press {ih}.
3 When you finish talking, press
{ih}.
1 {x}
L When only 1 handset is
registered, the base unit pages
the handset automatically.
2 To page a specific handset, enter the
handset number.
To page all handsets, press {0}.
L To stop paging, press {x}.
L When you page all handsets, only
the handset user who answers
first can take the intercom call.
3 When you finish talking, press {s}.
Note:
L When more than 2 handsets are
registered, the base unit pages all
handsets a few seconds after
pressing {x} in step 1.
Answering an intercom call
1
Press {C} to answer the page.
2 When you finish talking, press
{ih}.
1 Press {x} to answer the page.
2 When you finish talking, press {s}.
Note for handset and base unit:
L Even when the ringer volume for
outside calls is set to off (page 17, 23),
the handset and/or base unit rings at a
low level for intercom calls.
Transferring calls
Outside calls can be transferred
between 2 handsets, or between the
handset and base unit.
1 During an outside call, press {INT}
to put the call on hold.
2 To page the base unit, press {0}.
To page a specific handset, enter the
handset number.
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {INT} to return to
the outside call.
4 To complete the transfer, press
{ih}.
Handset
Base unit
Handset
Base unit
Handset
TG7341NZ(e).book Page 38 Wednesday, September 3, 2008 11:37 AM