Filter
Top Products
Programming
24
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*3 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*4 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*5 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*6 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
Base Unit Setup
*1
Recall/Flash
*6
<600 msec.>
–18
Area Code –26
Base Unit PIN
<0000>
–26
Repeater Mode
<Off>
–27
Top-menu Sub-menu 1 Sub-menu 2 Page
TG7341NZ(e).book Page 24 Wednesday, September 3, 2008 11:37 AM