Filter
Top Products
Intercom/Locator
39
L The outside call is routed to the
paged party.
1 During an outside call, press {x} to
put the call on hold.
2 To page a specific handset, enter the
handset number.
To page all handsets, press {0}.
L When you page all handsets, only
the handset user who answers
first can take the transferred call.
3 Wait for the paged party to answer.
L If the paged party does not
answer, press {x} to return to the
outside call.
4 To complete the transfer, press {s}.
L The outside call is routed to the
handset.
Transferring a call without speaking
to the other unit’s user
1 During an outside call, press {INT}
to put the call on hold.
L k flashes on the handset display
to indicate the outside call is on
hold.
2 To page the base unit, press {0}.
To page a specific handset, enter
the handset number.
3 {ih}
L The outside call rings at the
paged party.
1 During an outside call, press {x} to
put the call on hold.
L The in use indicator on the base
unit flashes to indicate the outside
call is on hold.
2 To page a specific handset, enter
the handset number.
To page all handsets, press {0}.
3 {s}
L The outside call rings at the
handset.
Note for handset and base unit:
L If the paged party does not answer the
call within 1 minute, the call rings at
the paging party again.
Answering a transferred call
Press {C} to answer the page.
Press {s} to answer the page.
Note for handset and base unit:
L After the paging party disconnects,
you can talk to the outside caller.
Base unit
Handset
Base unit
Handset
Base unit
TG7341NZ(e).book Page 39 Wednesday, September 3, 2008 11:37 AM