Filter
Top Products
Useful Information
66 For assistance, please visit http://www.panasonic.com/consumersupport
General
Problem Cause & Remedy
The unit does not work. LCheck the settings (page 8).
LCheck whether the dialing mode setting is correct
(page 15).
LFully charge the battery (page 9).
LClean the charge contacts and charge again (page 10).
LCheck battery installation (page 9).
LUnplug the base unit’s AC adaptor to reset it. Plug in,
and try again.
LRe-install the battery (page 9) and fully charge it.
“Recharge battery” is
displayed, “7” flashes,
or the handset beeps
intermittently.
LFully charge the battery (page 9).
“Charge for 6h” and
“8” are displayed and
the handset does not
work.
LThe battery has been discharged. Fully charge the
battery (page 9).
LCheck battery installation (page 9).
You charged the battery
fully, but “Recharge
battery” is still
displayed and/or “7”
continues to flash, or
“Charge for 6h” and
“8” are displayed.
LClean the charge contacts and charge again (page 10).
LThe battery may need to be replaced. If you install a
new battery, fully charge it (page 9).
The CHARGE indicator
does not go out after the
battery has been
charged.
LThis is normal.
If you cannot solve your
problem
LVisit our website:
http://www.panasonic.com/support
LContact us via the web at:
http://www.panasonic.com/contactinfo
LCall our customer call center at:
1-800-211-PANA(7262)