Filter
Top Products
Phonebook
24 For assistance, please visit http://www.panasonic.com/consumersupport
L“2=volume” will not be displayed
when the Name Announcement is
turned off.
LIf the Name Announcement is turned off
(page 44), the handset will not
announce the name or phone number
displayed on the handset.
Chain dial feature using the
handset
This feature allows you to dial phone
numbers from the phonebook while you
are on a call.
Example: Using a long distance calling
card
1 Dial from the phonebook:
1-800-012-3456 (Calling card access
number).
2 When prompted, dial from the
phonebook:
1234 (Calling card PIN).
3 When prompted, dial from the
phonebook:
1-555-012-3456 (the person you want
to call).
1 During an outside call, press
{MENU}.
2 Search for the desired item by pressing
{V} or {^}.
3 Press {Call}.
LThe phone number is dialed.
LIf required, repeat steps 1 to 3 for any
remaining numbers.
Note:
LWhen storing a calling card access
number and your PIN in the phonebook
as one phonebook item, press {P} to
add pauses after the number and PIN as
necessary (page 17).
LIf you have rotary or pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone.
Editing items in the phonebook
1 Press {Phone book} (right soft key).
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {Edit}.
4 Edit the name if necessary. See the
character table on page 22 for
character entry.
5 Press {V}.
6 Edit the phone number if necessary.
7 Press {V}, then press {Save}.
LTo edit other items, repeat from step
2.
8 Press {OFF}.
Erasing items in the phonebook
1 Press {Phone book} (right soft key).
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {Erase}.
LTo cancel erasing, press {No}.
4 Press {Yes}.
LTo erase other items, repeat from
step 2.
5 Press {OFF}.
The handset will not make
announcements, when:
Lthe Name Announcement is turned
off
Lthe Answering System is in use
Lthe handset has lost communication
with the base unit
Lthe base unit is announcing
Lthe base unit is making an outside
call.