Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport 63
The handset cannot
automatically edit the
caller list/incoming phone
numbers.
LThe Caller ID number auto edit feature is turned off.
Turn it on (page 42) and try again.
LYou need to press {C} or {s} after editing the number.
The handset display exits
the caller list or
phonebook.
LDo not pause for over 60 seconds while searching.
The Ringer/Message
Alert indicator flashes
slowly when the handset
is not ringing and in use.
LThe Message Alert is turned on and new messages
have been recorded. Turn the Message Alert off
(page 55) or listen to the new messages (page 48, 49,
52 ).
You cannot have a
conversation using the
headset.
LMake sure the optional headset is connected properly
(page 59).
LIf “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
The handset does not
announce the name and
phone number in the
caller list, phonebook,
redial list or one-touch
dialer.
LName Announcement is turned off. Turn it on (page 44).
When Talking Keypad is
turned on, the phone
number you dialed is not
announced correctly.
LIf you dial a phone number quickly, the handset and
base unit may not announce the dialed phone number
correctly. For best results, dial each digit one at a time,
and wait for the unit to announce each digit before
dialing the next digit.
The handset does not
announce the entered
number when pre-dialing
(page 16).
LHandset Talking Keypad is turned off. Turn it on
(page 44).
The base unit does not
announce the dialed
number.
LBase Unit Talking Keypad is turned off. Turn it on
(page 44).
When Talking Keypad
and/or Name
Announcement is turned
on, the handset and/or
base unit does not make
announcements.
LThe Answering System is in use, such answering a call
or playing back messages. Try again later.
LThe handset has lost communication with the base unit.
Walk closer to the base unit and try again.
LThe base unit is making an outside call.
Problem Cause & Remedy