Filter
Top Products
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/consumersupport 19
To adjust the speaker volume during a
conversation
To increase volume, press VOLUME {>}.
To decrease volume, press VOLUME {<}.
LThere are 8 volume levels. If you try to
increase/decrease volume when it is at
the maximum/minimum level, the base
unit will beep 3 times.
LThe selected volume level is displayed
while you are adjusting the volume.
To redial the last number dialed
Press {SP-PHONE}, then press
{REDIAL}.
L“Redial” is announced.
LIf the Base Unit Talking Keypad is turned
off (page 44), the base unit will not
announce.
To put a call on hold
Press {HOLD/CONF} during a
conversation.
LThe SP-PHONE indicator flashes.
To return to the call, press {SP-PHONE}.
LThe handset user can also take the call
by pressing {C} or {s}.
LIf another phone is connected on the
same line (page 8), you can also take
the call by lifting its handset.
LIf a call is kept on hold for 6 minutes, an
alarm tone will start to sound. After 4
additional minutes on hold, the call will
be disconnected.
The base unit will not make
announcements, when:
Lthe Base Unit Talking Keypad is
turned off
Lthe Answering System is in use using
the handset
Lthe handset is announcing.
Hands-free Digital Duplex
Speakerphone
For best performance, please note the
following:
LTalk alternately with the other party in
a quiet room.
LIf you or the other party has difficulty
hearing the conversation, press
VOLUME {<} to decrease the
speaker volume.