Filter
Top Products
Answering System Features
54 For assistance, please visit http://www.panasonic.com/consumersupport
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number, then press {*} to skip the
greeting message and record your
message after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
Store any 2-digit number (00–99).
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Press {Select} at “Set answering”.
4 Scroll to “Remote code” by pressing
{V} or {^}, then press {Select}.
5 Enter a 2-digit remote code (00-99).
6 Press {Save}, then press {OFF}.
Note:
LTo confirm the remote code, repeat
steps 1 to 4. Press {OFF} when finished.
Caller’s recording time
You can change the maximum message
recording time.
“1min”, “2min”, or “3min”: Caller
messages are limited to 1 minute to 3
minutes.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Press {Select} at “Set answering”.
4 Scroll to “Recording time” by
pressing {V} or {^}, then press
{Select}.
5 Select the recording time by pressing
{V} or {^}.
LYou can also select the recording
time by pressing {1}, {2}, {3} or {0}
(Greeting only).
6 Press {Save}, then press {OFF}.
Number of rings
You can select the number of times the unit
rings before the Answering System
answers a call, from “2” to “7” or “Toll
saver”*.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Press {Select} at “Set answering”.
If you select “Greeting only”, the
unit will answer calls with the greeting
message, and then hang up. The unit
will not record any incoming messages.
The base unit will display “ ” instead
of the number of messages.