Filter
Top Products
Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport 49
Note:
LThe display shows the message number
during playback.
LDuring playback, the unit will announce
the day and time that each message
was recorded. (Voice time/day stamp)
LAt the end of the last message, the unit
announces “End of final message”.
LIf a call is received during playback, the
unit rings and playback stops. To answer
the call, press {SP-PHONE}. For
playback, start again from the beginning
after hanging up.
To adjust the speaker volume
9 levels (high to off) are available. Press
VOLUME {>} or VOLUME {<}
repeatedly while using the answering
system.
To slow down the playback speed (Slow
Talk Message Playback)
Press {MESSAGE/SLOW TALK} during
playback.
LTo return to normal speed, press
{MESSAGE/SLOW TALK} on the base
unit.
LEach time you press the button during
playback, the speed will change to slow/
normal.
LPlayback speed will return to normal
after you finish listening to messages.
Repeating a message
Press {REPEAT} while listening to the
message.
LIf pressed within the first 5 seconds of a
message, the previous message will be
played.
Skipping a message
Press {SKIP} to play the next message.
Stopping message playback
Press {STOP}.
LTo resume playback, press {MESSAGE/
SLOW TALK}.
LIf you do not press any button for 60
seconds or if you press {STOP} again,
playback mode will be canceled.
Erasing a specific message
Press {ERASE} while listening to the
message you want to erase.
LThe unit beeps, then plays back the next
message.
LTo exit playback mode
, press [STOP]
twice.
Erasing all messages
1 Press {ERASE} while the base unit is
not being used.
LThe unit will announce “To erase all
messages, press ERASE again.”
2 Within 10 seconds, press {ERASE}
again.
LThe unit will announce “No
messages”.
Note:
LCaller information for the erased
messages will remain in the caller list.
Listening to messages using
the handset (Remote Operation)
{OFF}
{MENU}