Filter
Top Products
Preparation
For assistance, please visit http://www.panasonic.com/consumersupport 15
LThe display changes to the selected
language.
LYou can also select a language by
pressing {V} or {^}.
5 Press {Save} or {Salvar}, then press
{OFF}.
Note:
LIf you select a language you cannot
read, press {MENU} {0} {8} {1} {Save}
to change the display language to
English.
Setting the dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {Select}.
4 Press {Select} at “Set dial mode”.
5 Press {V} or {^} to select the desired
setting.
6 Press {Save}, then press {OFF}.
Setting the date and time
1 Press {MENU}.
2 Scroll to “Date and time” by pressing
{V} or {^}, then press {Select}.
3 1Enter the current month, day, and
year by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6} {1}{5} {0}{5}.
2Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30 PM
Press {0}{9} {3}{0}.
4 Select “AM” or “PM” by pressing {AM/
PM}.
5 Press {Save}.
LWhen the date and time are set, E
disappears from the base unit display.
LIf the handset beeps 3 times, the date
and time were not set correctly. Enter
the correct digits.
6 Press {OFF}.
To confirm the date and time
Repeat steps 1 and 2.
LThe current date and time are displayed.
When finished, press {OFF}.
The date and time may be incorrect
after a power failure. When E flashes
on the base unit display, set the date
and time again.
For Caller ID service users
(page 27)
LWhen a call is received, Caller ID
information adjust the date and time if
the time is incorrect.
LCaller ID information will
automatically adjust the date and
time for daylight saving time.
LIf the date and time has not
previously been set, Caller ID
information will not adjust the date
and time.
Date:06.15.2005
Time:12:00 AM
KAM/PM SaveL
Date:06.15.2005
Time:09:30 AM
KAM/PM SaveL