Filter
Top Products
APPENDIX
370 User Manual
Conditions
• If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.
• The duration time display is only shown when you make or receive an outside call. Count
start time for outgoing calls can be programmed as desired.
• When you confirm key programming, be sure to press a button while on-hook. If the "Full
One-Touch Dialing" feature is set, dialing mode will start when pressing PF (Programmable
Feature), DSS (Direct Station Selection), SAVE or REDIAL button.
Message Waiting MESS. EN ATTENTE Message Waiting (MESSAGE) button is
assigned.
NIGNT NUIT Night button is assigned.
Not Stored NON MEMORISE No programming is assigned.
Pref.In :CO-02 ENT.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Incoming".
Pref.In :NO ENT.PREF:NON Select "No Line Preference — Incoming".
Pref.In :Ring ENT.PREF:SONN Select "Ring Line Preference — Incoming".
Pref.Out:CO-02 SOR.PREF:LR-02 Select "Prime Line (Outside Line) Preference
— Outgoing".
Pref.Out:ICM SOR.PREF:INTCM Select "Prime Line (INTERCOM) Preference
— Outgoing".
Pref.Out:Idle SOR.PREF:LIB. Select "Idle Line Preference — Outgoing".
Pref.Out:No SOR.PREF:NON Select "No Line Preference — Outgoing".
Save SAUVEGARDE SAVE button is assigned.
Tone Call APPEL-TON. Select Ring-Calling mode.
Tone Type-2 TON. TYPE-2 Select ringing tone for a CO button or
intercom calls.
TRK GRP-3 GR LR-3 Group-CO (G-CO) button is assigned.
VTR-101 TMV-101 Voice Mail (VM) Transfer button is assigned.
Voice Call APPEL VOCAL Select Voice-Calling mode.
092-555-2111 092-555-2111 One-Touch Dialing button is assigned.
English Display French Display Description