Filter
Top Products
Station Features and Operation (DPT/SLT)
176 User Manual
Conditions
• An optional Doorphone Card and a doorphone are necessary for this feature.
• If you dial "5" again while the door is open, the door will stay open for another five seconds.
• An access tone can be programmed not to be sent to the monitored doorphone before
monitoring starts.
• Doorphone Call Destination
It is necessary to program the extensions that can receive doorphone calls during day and
night mode.
• What if a doorphone call is not answered?
If not answered within 30 seconds, the call stops ringing and is canceled.
• Unlocking the door opener
During a doorphone call, any extension user can unlock the door opener (user-supplied)
from their extensions by dialing "5" to let the visitor in.
• You cannot hold and transfer the doorphone call.
• The door can be unlocked by the following:
1) Extensions that are programmed to receive doorphone calls.
2) Any extension that is engaged in a doorphone call.
• The door opener will open the door, even if a doorphone is not installed.
• You can modify the door opener timer from five seconds (default) to three seconds by
System Programming.
<PT>
• While talking to a doorphone, you can unlock the door using the one-touch dialing
button instead of dialing "5." In this case, "5" must be stored in the one-touch dialing
button by Station or System Programming.
• You can assign a ringer frequency (8 types) to each doorphone by System Programming.
This is only available for DPT.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can call a doorphone
and open a door using the display operation.
Programming Guide References
[607-608] Doorphone Ringing Assignment —— Day / Night
[818] Doorphone Tone Frequency Selection
[820] Doorphone Ringing Time
[990] System Additional Information
User Manual References
2.2.2 Flexible Button Assignment
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu