Panasonic KX-TD1232C Telephone User Manual


 
Station Features and Operation (DPT/SLT)
108 User Manual
Alternating (to Ring-Calling mode)
Conditions
Voice-signaling is not available in the following cases:
if the other extension is an SLT.
if the other extension is busy on another call.
if another call is ringing on the other extension.
One time switching
You can switch the desired calling mode only once during a call.
If the party you are calling is using a single line telephone (SLT), only Ring-Calling mode
is available.
<PT>
Mode Selection
You can select either to be ring-signaled or voice-signaled by Station Programming
(Intercom Alert Assignment).
The default is Ring-Calling mode.
User Manual References
2.2.1 Initial Settings
4.3.47 Hands-free Answerback [PT only]
4.3.49 Intercom Calling
Any Telephone
If the extension you are calling is in Voice-Calling mode, you hear a confirmation.
Ringback tone
Ring-Calling mode is established.
Dial .