Filter
Top Products
Station Features and Operation (DPT/SLT)
180 User Manual
4.3.40 Executive Busy Override — Extension
You can interrupt an existing extension call (either between two inside parties or between an
outside party and an inside party) by dialing "2". This establishes a 3-party conference call.
To leave the conference
To terminate one party and talk to the other
Conditions
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• This feature does not work when "Data Line Security" or "Executive Busy Override Deny"
is set at either or both of the other parties.
Any Telephone
7230 / 7235 / 7433 / 7436
Dial 2.
Confirmation tone (optional)
If you hear a busy tone after making an intercom call;
A three-party conference
is now established.
2
Over
S1
S2
S3
If you hear a busy tone after making an intercom call;
Press Over (S2).
Confirmation tone
(optional)
A three-party conference is
now established.
Any Telephone
The other two parties
continue their conversation.
Hang up or press
SP-PHONE/MONITOR
.
PT
Confirmation tone (optional)
Press the CO or INTERCOM
of the party to remain connected.
or
(CO) INTERCOM