Filter
Top Products
Station Features and Operation (DPT/SLT)
User Manual 105
Entering account codes during or after a conversation
During a conversation or within 15 seconds after the other party hangs up;
Conditions
• In Verified - All Calls mode, you must always enter a pre-assigned account code when
making any of the following calls.
a) Call Forwarding — to Outside Line
b) Manual Dialing (Selecting an outside line)
c) One-Touch Dialing
d) Pickup Dialing (Hot Line)
e) Station Speed Dialing
f) System Speed Dialing
• If you use Last Number Redial or Saved Number Redial, you do not have to re-enter the
Account Code.
• In Option mode, it is possible to record a calling or called party's account code in the
SMDR, during a conversation or within fifteen seconds after the other party hangs up.
• There is no need for an account code entry when receiving incoming calls.
• To clear and re-enter the account code, press " ".
• An account code can be up to 10 numeric digits (0 through 9). FLASH, PAUSE, etc. are not
allowed. After entering an account code, the delimiter "#" or "99" must be entered.
• Memory Dialing
An account code can be stored into Memory Dialing ("One-Touch Dialing", "System /
Station Speed Dialing" ). The sequence to enter an account code into Memory Dialing is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
or
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
PT
7230 / 7235 / 7433 / 7436
account code
Enter an account code
(10 digits max., 0...9).
Press Account
(flexible button).
The corresponding
indicator light turns on.
You can keep talking.
Press ACCNT (S3).
ACCNT
S1
S2
S3
account code
Enter account code
(10 digits max., 0...9).
You can keep talking.
Dial #. Dial #.
You may dial
99 instead
of "#".
You may dial 99
instead of "#".
(Account)