Filter
Top Products
Station Features and Operation (DPT/SLT)
316 User Manual
Conditions
• If a Direct In Lines (DIL) 1 : 1 call is forwarded by Call Forwarding, the data will be logged
at both the forwarding and forwarded extension.
• You can lock the display so that incoming call information is not shown on the display.
• If you modify the displayed telephone number, the new number will be memorized.
• With the KX-T7433, KX-T7436 or KX-T7235, you can set or cancel overwriting the call
log using the display operation.
Programming Guide References
• [100] Flexible Numbering
• [406] Caller ID Assignment
• [417] Outside Line Name Assignment
User Manual References
• 2.2.1 Initial Settings
• 4.5.4 Call Log Lock, Incoming (KX-T7436 / KX-T7433 / KX-T7235 / KX-T7230 only)
• 4.5.9 KX-T7235 Display Features - System Feature Access Menu
• 4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access
Menu
Operating sequence
1. Press the SHIFT button.
2. Press the OLD (S1) or NEW (S2) button to see
the confirmed or unconfirmed information.
3. Press the NEXT (S3) or PREV (S3) button to
see other caller's information. Or modify the
number, if required.
4. To call back, go off-hook and then press the
CALL (S1) button.
Note
To delete the displayed number, press the CLR
(S2) button.
The PREV (S3) button appears by pressing the
SHIFT button while confirming.
When a new call is logged, the display changes to
the second display automatically.