Filter
Top Products
Station Features and Operation (DPT/SLT)
206 User Manual
Canceling
Checking and Selecting a message notification by the receiver
Calling back the message notification sender
PT and SLT
extension no.
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone.
Dial 700.
7 0 0
phantom extension no.
Dial the extension number or the phantom extension
number where you left a message notification.
or
Display PT
Press MESSAGE button, Another Extension Message Waiting button or the
Phantom Extension Message Waiting button repeatedly until the desired message appears.
If there is any message notification, the message waiting lamp, another extension
message waiting lamp or phantom extension message waiting lamp (MESSAGE
indicator) light will be on. When the telephone is idle and on-hook;
MESSAGE
The message notifications you received are shown on the display in the order
they were received.
<PT Display Example>
When Tony at extension 123 left a message notification:
123:Tony
MESSAGE MESSAGE
or
or
(Another Extension
Message Wating)
(Phantom Extension
Message Wating)
PT
If there are more than one message
notification left on your extension, you
can choose the desired message sender
(display PT only).
The message notification is
cleared after the conversation.
Press MESSAGE button, Another Extension
Message Waiting button or the Phantom
Extension Message Waiting button.
Lift the handset or press
SP-PHONE/MONITOR.
Talk.
Dial tone 4*, when
a message has been
received at your
extension.
MESSAGE
MESSAGE MESSAGE
oror
(Another Extension
Message Waiting)
(Phantom Extension
Message Waiting)
* One of the dial tones. Refer to the "Tone List" in the Appendix (Section 6).