Filter
Top Products
Station Features and Operation (DPT/SLT)
262 User Manual
Checking the setting time
Stopping the alarm
Conditions
• System Time
The system clock must be set before the alarm is set.
• If you are connected to a KX-TD1232 System, Timed Reminder message can be recorded
by the Manager or an Operator. ("Outgoing Message (OGM)"). When the alarm is heard,
you can hear the message by going off-hook, if it has been recorded. You hear an
intermittent tone (dial tone 3) instead of the message in the following cases:
a) A DISA Card is not equipped.
b) All DISA ports are busy or OUS (Out-of-Service).
c) The Timed Reminder message has not been stored.
• If other extension user calls your extension when the alarm is sounding, he or she will hear
a busy tone.
• If you receive an incoming call during the alarm, the ringing starts after the alarm stops.
• If you are having a conversation at the time the alarm is set to sound, the alarm starts after
the conversation.
Display PT
Dial 762.
Lift the handset or press
SP-PHONE.
Hang up or press
SP-PHONE.
267
Dial tone
If "10:10 AM" has been set:
<PT Display Example>
– one time
or
– daily
Alarm 10:10AM*
Alarm 10:10AM
Lift the handset or press SP-PHONE/MONITOR.
Pressing any key also stops the alarm (PT only).
PT and SLT