Filter
Top Products
Multi-Unit User Operations
Chapter 5
49
5 Press .
•A confirmation tone sounds and the
display will return to the stand-by mode.
Selecting the Base Unit Access
Automatic base unit access
The handset automatically selects a registered base unit.
•When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
•If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.
Specified base unit access
You can only select one registered base unit (1 to 4) you want to operate.
•You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is “Automatic base unit access”. To select the desired base unit, program as follows.
1 Press .
2 Press G or F until “
F i
” is displayed.
3 Press .
•The current setting is flashing.
0: Automatic base unit access
1 to 4 (The registered base unit number):
Specified base unit access
4 Press G or F to select the desired
base unit number (1 to 4).
•You can also press the desired base unit
number to .
•The selected base unit number flashes.
4
1
OK
F i000 i234
Ex. Automatic base unit access is selected.
F i000 i234
Ex. Base unit 1 is selected.
KX-TCD961CXB(47~56) 99.12.3 2:20 PM Page 49