Filter
Top Products
Useful Information
Helpline Tel. No.: U.K. 0844 844 3898 215
Error messages
If the unit detects a problem, one of the following messages is shown on the handset
display.
Network:
Sign in:
Display message Cause/solution
Networks were not
found.
LMove closer to the base unit or an access point.
LPress {Search} to search for networks again.
LPress {Options} i Select “Add manually” to add
network manually.
LPress {Options} i Select “Preferred networks”
to configure preferred networks list.
Could not connect
to <Network name>
LA network connection failed.
LCheck that the security type and the network key are
correct.
LPress {OK} i Re-connect the network again.
Could not get IP
address from
<Network name>
LThe handset could not get an IP address automatically.
LCheck that the DHCP server of the base unit is enabled.
LMake sure the Static IP address of the computer uses
the same address as DHCP lease address.
Failed to connect
to the base unit.
Register again.
LThe handset is not registered to the base unit.
LRegister the handset (page 136).
Display message Cause/solution
Your Skype name and
password were not
recognized.
LThe Skype name and/or password you entered are not
correct.
LPress {Retry} i Re-enter the Skype name and
password correctly.
Sign in was not
successful.
LCheck the network connection.
LPress {Retry} to try again.
WP1050E.book Page 215 Thursday, March 29, 2007 11:31 AM