Filter
Top Products
Base Unit Settings
Helpline Tel. No.: U.K. 0844 844 3898 161
LThis feature is not available in AP (Bridge) mode.
DMZ:
This feature allows you to configure the DMZ (DeMilitarised Zone) settings. Enable DMZ
to expose a specified computer on your LAN to the Internet.
Important:
LA computer specified as the DMZ host may be vulnerable to security risks.
1 Click [Advanced Setup] on the Top Menu.
2 Click the [Advanced] tab, then click [DMZ].
3 Configure the settings, then click [Save].
4 Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThis feature is not available in AP (Bridge) mode.
Setting Description
[DMZ] L Select whether to enable or disable the DMZ feature.
[DMZ Host IP
Address]
LEnter the IP address of the computer to be exposed to the
Internet.
WP1050E.book Page 161 Thursday, March 29, 2007 11:31 AM