Panasonic KW-WP1050E Telephone User Manual


 
Base Unit Settings
172 Helpline Tel. No.: U.K. 0844 844 3898
3 Configure the settings, then click [Save].
4 Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LYou need to register the handset to the base unit again when you change the network
name (SSID). See “Registering the handset” on page 136.
Setting Description
[Mode] LSelect your wireless network mode from the pull-down menu.
LIf you have both 802.11b and 802.11g wireless devices in
your network, select [802.11b/g].
LIf you have only 802.11b wireless devices, select [802.11b]
[Channel] L Select [Auto] or the desired channel from 1 to 11.
[Network Name
(SSID)]
LEnter your wireless network name (SSID) (1 – 32
alphanumeric characters) in this data field.
[SSID Broadcast] LEnable or disable the setting to broadcast your SSID.
LIf you select [Disable], only wireless devices that know the
SSID of the base unit can connect to the base unit.
LIf you select [Enable], any wireless device can detect the
SSID of the base unit.
WP1050E.book Page 172 Thursday, March 29, 2007 11:31 AM