![](http://pdfasset.owneriq.net/b/6b/b6b190cb-90bd-4279-9067-c2cca824434f/b6b190cb-90bd-4279-9067-c2cca824434f-bga2.png)
Base Unit Settings
162 Helpline Tel. No.: U.K. 0844 844 3898
UPnP:
This feature allows you to configure the UPnP (Universal Plug and Play) settings.
Enabling UPnP allows the base unit to be compliant with the UPnP standard.
1 Click [Advanced Setup] on the Top Menu.
2 Click the [Advanced] tab, then click [UPnP].
3 Select the desired setting, then click [Save].
4 Click [Restart].
LThe base unit automatically restarts and the Top Menu is displayed.
Note:
LThis feature is enabled in AP (Bridge) mode automatically.
Setting Description
[UPnP] L Select whether to enable or disable the UPnP feature.
WP1050E.book Page 162 Thursday, March 29, 2007 11:31 AM