Filter
Top Products
Base Unit Settings
158 Helpline Tel. No.: U.K. 0844 844 3898
Note:
LTo edit the settings:
1 Click the desired entry number under the static DHCP setting, click the desired entry
number under the Static DHCP (IP Address Reservation) heading in LAN/DHCP
Server page (page 155).
2 Edit the items in the Static DHCP Setting page.
3 Click [Save].
4 Click [Restart].
LTo delete the settings:
1 Click the desired entry number under the static DHCP setting, click the desired entry
number under the Static DHCP (IP Address Reservation) heading in LAN/DHCP
Server page (page 155).
2 Click [Delete] in the Static DHCP Setting page.
3 Click [OK] in the confirmation dialogue box.
4 Click [Restart].
Port Forwarding:
This feature allows you to configure the port forwarding settings. Enabling Port Forwarding
allows other Internet users to access services running on your LAN.
Up to 10 settings can be stored.
Important:
LWhen setting up the port forwarding feature, there is a possibility of illegal access to the
forwarding port from the Internet. For safety reasons, set this feature only when
required.
1 Click [Advanced Setup] on the Top Menu.
WP1050E.book Page 158 Thursday, March 29, 2007 11:31 AM