Filter
Top Products
Base Unit Settings
Helpline Tel. No.: U.K. 0844 844 3898 191
Load Settings:
The base unit settings can be loaded from a backup file. If you reset the base unit settings
to factory default, the Load Settings page can load its settings from the backup file.
Note:
LThe backup file contains network settings. When these settings are loaded, all network
settings except for the user name and password for the base unit are changed as they
were saved.
1 Click [Advanced Setup] on the Top Menu.
2 Click the [Maintenance] tab, then click [Load Settings].
3 Enter the file name under the Load Settings heading.
LYou can also click [Browse...] to select the desired backup file name on the Choose
file dialogue box, and click [Open].
4 Click [Load].
5 Click [Restart].
LThe base unit restarts and the Top Menu is displayed.
WP1050E.book Page 191 Thursday, March 29, 2007 11:31 AM