Filter
Top Products
Arming the System
8
Setting the Away mode
When nobody (including pets) remains at home, select this mode.
When you set the Away mode,
— the entire system (interior and perimeter) is armed, and
— exit delay begins so that you can leave through the entry/exit door.
: Press the soft key ( ), and follow steps 2 to 4 above, using
the cordless handset.
*
The exit delay time depends on the system setting.
• To exit the menu, press [STOP] or [OFF].
To confirm the security mode you set, press [ADT] in the standby mode.
1 Press [ADT].
2 Press [
g
] at “ARM”.
3 Scroll to “AWAY” by pressing [
d
] or [
B
].
4 Press [
g
], then go out through the entry/exit
door during the exit delay time.*
• The armed AWAY message is displayed.
Base Unit
ARM
g
AWAY
g
Handset
ADT
SecurityPhone.book 8 ページ ２００４年７月２１日 水曜日 午後６時５８分