Filter
Top Products
13
Disarming the security system
When alarm sounds while the system is armed:
1 Enter your security code.
• The alarm stops, the security system is disarmed.
• Check the alarm display. If the protected doors or windows remain open, close
them.
2 Press [ADT] to go to the standby mode.
3 Enter your security code, then press [1] to go to the ready status.
• A memory of alarm is cleared. ALARM SIGNAL IS NOT SENT TO THE
CUSTOMER MONITORING CENTER.
• “ ” is displayed.
READY
SecurityPhone.book 13 ページ ２００４年７月２１日 水曜日 午後６時５８分