Filter
Top Products
11
Arming the System
Setting the Instant mode
When you stay at home and no one intends to use an entry/exit door, select this
mode.
When you set the Instant mode,
— the system is armed same as the Stay mode, and
— if the protected perimeter windows and doors are opened, an alarm sounds
immediately.
: Press the soft key ( ), and follow steps 2 and 3 above,
using the cordless handset. Press [OFF] to go to the standby mode.
• To exit the menu, press [STOP] or [OFF].
To confirm the security mode you set, press [ADT] in the standby mode.
1 Press [ADT].
2 Press [
g
] at “ARM”.
3 Scroll to “INSTANT” by pressing [
d
] or [
B
],
then press [
g
].
• The armed INSTANT message is displayed.
4 Press [STOP] to go to the standby mode.
IMPORTANT:
Arming the system in this mode greatly increases the chance of false alarms.
Use extreme care in selecting this mode of arming.
Base Unit
ARM
g
INSTANT
g
ARMED
;
INSTANT
;
You may exit now
Example
Handset
ADT
SecurityPhone.book 11 ページ ２００４年７月２１日 水曜日 午後６時５８分