Filter
Top Products
Security Codes & Authority Levels
32
RF User Number
If you enroll a wireless button device (keyfob) in system, you need to set the zone
number for the device.
Refer to “RF User Number” on page 31 in the 3000EN Security Systems User’s Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.
1 Press [ADT].
2 Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3 Scroll to “USER CODES” by pressing [
d
] or [
B
],
then press [
g
].
4 Scroll to “RF USER NUMBER” by pressing [
d
]
or [
B
], then press [
g
].
5 Enter your security code.
6 Enter the user number of 2 digits, then press
[
g
] (ENTER).
(Ex. To select user number 8, enter “08”.)
7 Enter the zone number of 2 digits.
(Ex. To select zone number 8, enter “08”.)
8 Press [
g
] (ENTER).
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved.
Try again from step 4.
9 Press [STOP] to go to the standby mode.
READY
Base Unit
OTHER FUNCTIONS
g
USER CODES
g
RF USER NUMBER
g
ENTER CODE
----
Enter User #
-,-
Enter User #
0,8
=ENTER
READY
g
Example
Enter Zone #
--
Enter Zone #
08
=ENTER
READY
g
Example
SecurityPhone.book 32 ページ ２００４年７月２１日 水曜日 午後６時５８分