Filter
Top Products
40
Checking the Current Status
Display Status
You can display faulted zones and a current system status, using this feature.
Refer to “Checking For Open Zones” on page 14 in the 3000EN Security Systems
User’s Guide.
Make sure all perimeter doors and windows are closed and is
displayed.
: Press the soft key ( ), and follow step 2 above, using the
cordless handset. Press [OFF] to go to the standby mode.
1 Press [ADT].
2 Scroll to “STATUS REQUEST” by pressing [
d
]
or [
B
], then press [
g
].
• The current status of the phone is displayed for
10 seconds.
3 Press [STOP] to go to the standby mode.
READY
Base Unit
STATUS REQUEST
g
Handset
ADT
SecurityPhone.book 40 ページ ２００４年７月２１日 水曜日 午後６時５８分