Filter
Top Products
25
Security Codes & Authority Levels
Adding User Code
Refer to “Security Codes & Authority Levels” on pages 30 to 31 in the 3000EN
Security Systems User’s Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.
Ex. To add a user number “08” and its security code
“1234” in the system
(continued)
1 Press [ADT].
2 Scroll to “OTHER FUNCTIONS” by pressing [
d
]
or [
B
], then press [
g
].
3 Scroll to “USER CODES” by pressing [
d
] or [
B
],
then press [
g
].
4 Press [
g
] at “ADD USER CODE”.
5 Enter the security code for system master.
6 Enter the user number of 2 digits (03 to 49),
then press [
g
] (ENTER).
(Ex. To add user number 8, enter “08”.)
7 Enter the new security code for the new user.
(Ex. “1234” is entered.)
READY
Base Unit
OTHER FUNCTIONS
g
USER CODES
g
ADD USER CODE
g
ENTER CODE
----
Enter User #
-,-
Enter User #
0,8
=ENTER
READY
g
Example
ENTER NEW CODE
-,-,-,-
ENTER NEW CODE
1,2,3,4
=ENTER
READY
g
Example
SecurityPhone.book 25 ページ ２００４年７月２１日 水曜日 午後６時５８分