Panasonic K10059 Telephone User Manual


 
17
Chime Mode
Even if the security system is not armed, the Chime mode can alert you by three
beeps and announcement to the opening of a perimeter door or window.
Refer to “Chime Mode” on page 22 in the 3000EN Security Systems User’s Guide.
While the security system is armed, you can not turn the Chime on or off. To
turn on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and is
displayed.
: Press the soft key ( ), and follow steps 2 and 3 above,
using the cordless handset. Press [OFF] to go to the standby mode.
If an opening of a protected door or window occurs when the Chime mode is on,
the phone will stop the operation and go into the Chime mode.
The following operations that will stop include:
— programming the function menu
— searching an item in the caller list, phone book or redial list
— recording/playing back a greeting message
— playing back messages
— making an intercom
— copying phone book
— re-registering the cordless handset
If an opening of a protected door or window occurs when the Chime mode is on,
beeps sound and a conversation using a phone is disconnected temporarily.
To confirm the Chime mode setting, press [ADT] in the standby mode. The
“CHIME” message will be displayed when the security system is disarmed, and
the Chime mode is turned on.
1 Press [ADT].
2 Scroll to “CHIME ON/OFF” by pressing [
d
] or
[
B
], then press [
g
].
3 Enter your security code.
If the Chime was turned on, the mode changes to
off. If the Chime was turned off, the mode changes
to on.
If you entered the wrong security code, a
confirmation tone (one beep) is not heard and the
phone will go back to the previous display. The
setting is not saved. Try again from step 2.
4 Press [STOP] to go to the standby mode.
READY
Base Unit
CHIME ON/OFF
g
ENTER CODE
----
Handset
ADT
SecurityPhone.book 17 ページ 2004年7月21日 水曜日 午後6時58分