Filter
Top Products
33
ANSWERING SYSTEM
ANSWERING SYSTEM
Message window
The table below summarizes the messages
displayed on the telephone base display.
- When the answering system is
turned off.
00
(ONsteadily) There are no messages in the
answering system.
1-59
(ashing) Totalnumberofnewmessages.
1-59
(Onsteadily) Totalnumberofoldmessages.
F
(ashing) Memory is full.
CL
(ashing) Time is not set and there are
old messages.
LA
(ashing) Thetelephoneisbeing
accessed remotely.
LA/1-59
(alternating)
Thetelephoneisbeing
accessed remotely and the
alternatingnumberindicates
thetotalnumberofmessages.
L0-L5
(Onsteadily) Telephonebasevolumelevel
whenadjusting.
Access the answering system
remotely
1. Dialyourphonenumberfromanytouch-tone
telephone.
2. Onceyouransweringsystemtakesyourcall
andyouhearyouroutgoingannouncement,
pressthe[#]key.
3. Enter your security code using the numeric
keypadonthetouch-tonetelephone.The
system will start playing messages after you
hearaconrmationtone.
Remote access commands
Touch-tone Remote command
1
Replay the current or previous message.
2
Play/stopmessages.
3
Skiptothenextmessage.
4
Turn the answering system on or off.
0
Deletethecurrentmessage.
Notes:
1.Ifyouransweringsystemisoff,youwillnot
hear your outgoing announcement. The system
will answer your call after 10 rings.
2.Ifyouhaveenteredanincorrectsecuritycode,
thesystemwillaskyoutoenterthecodeagain.
3.Ifyouhaveforgottenthesecuritycode,youwill
need to reset the system. The security code
willberestoredtoitsdefaultsettingas0000
after system reset.