Filter
Top Products
• • • • 2 • • • •
Introducing your Meridian 1 telephone
The figure above shows the location of each control on your telephone set, and a brief description of each
control begins on the next page. Your telephone set may not have some of the optional equipment shown.
Your telephone’s controls
Volume bar
Use
to control the volume of the handset, the speaker, and the ringer. Raise the volume
by pressing the right side of the bar. Lower it by pressing the left side.
Microphone
A microphone is integrated into the M2616 and M2008HF telephones, allowing you to have a telephone
conversation without using the handset (known as Handsfree calling).
RLS
You can terminate an active call by pressing
, or by hanging up the handset.
is especially useful
for disconnecting handsfree calls.
LCD indicator
A steady
appearing in one of the LCD indicators means that the feature or line beside it is active. A
flashing
means the line is on hold or the feature is being programmed.
Hold
By pressing
, you can put an active call on hold. Return to the caller by pressing the extension
key beside the flashing
.
Handset
Lift the handset to place or answer a call.
Feature keys
You access telephone features and telephone lines with the feature keys. The keys are labeled for your
convenience.
Main extension key or Directory Number (DN) key
The lower right-hand key is the main extension key, also known as a Directory Number (DN) key. When
you pick up the handset, the line associated with this key is ready for you to make a call. You may have
more than one DN key assigned to your telephone. (This does not apply to the M2006 since it only
supports one line.)
Message Waiting light
The Message Waiting light turns on to indicate that a message has been left for you.