Filter
Top Products
• • • • 30 • • • •
Special features
On Hold on Loudspeaker (M2008HF and M2616 only)
This feature is available only in certain areas and requires additional equipment. It is not available on
the MSL-100.
The On Hold on Loudspeaker feature allows users such as commodities brokers to monitor one (with
the optional Loudspeaker) or several (with the Speech Monitor) stock markets, for example, while
talking to one or more customers using the handset. (A Speech Monitor works like a Loudspeaker, but
can handle up to eight channels.) At any time, the user can enter the call being monitored on the
Loudspeaker or Speech Monitor unit.
To use On Hold On Loudspeaker:
1. Place the call on hold.
2. Press
.
3. Press the DN key for the call on hold call. The call on hold is put on the Loudspeaker and is heard
publicly.
To talk privately to the party on the Loudspeaker:
— Use the handset on the Loudspeaker (if provided).
While the Loudspeaker is active, any other call is maintained on the handset. More than one call
can be put on hold, but only one call at a time can be placed on the Loudspeaker.
To use OHOL on the Speech Monitor:
1. Make a call from
or the DN of the Speech Monitor.
2. Place the call on hold. The Speech Monitor is automatically activated.
To talk privately to one of the parties on the Speech Monitor
— Take the call on the handset of the phone.
This conversation will not be heard on the Loudspeaker. Any other user with a Speech Monitor
DN on their set can enter the call by establishing a Multiple Appearance Conference.
To disconnect a call from the Speech Monitor:
— Press while the call is active.
To disconnect from the Speech Monitor:
— Switch off the Speech Monitor.
Loudspeaker
HOT DN