Filter
Top Products
• • • • 13 • • • •
Special features
Auto Dial Transfer
Auto Dial Transfer allows you to use your Auto Dial key to transmit digits to the central office after a
Trunk Switchhook Flash. You must be on a central office/exchange (CO) trunk call from or to a CO
which offers Centrex- or exchange line-type features.
To use Auto Dial Transfer when you pick up an incoming trunk call:
1. Press
and wait for interrupted dial tone.
2. Press
to call the number desired.
3. Replace the handset or press to end the call.
Attendant Recall
The Attendant Recall feature allows you to contact an attendant during a call and connect the call to
the attendant.
To contact the attendant during a call:
1. Press during a call.
2. Stay on the line until the attendant answers.
3. When you replace the handset, the caller remains connected to the attendant.
Call Transfer
Call Transfer allows you to direct a call to another number.
To transfer a call while on a call:
1. Press . The call is placed on hold and you hear dial tone.
2. Dial the number to which you want to transfer the call.
3. Press again, either when you hear ringback/ring tone, or after you talk privately to
the person to whom you are transferring the call.
Note:
On MSL-100, the call will be transferred once the transfer key in step three is pressed. Use
three-way call on MSL-100 to perform M-1 Call Transfer above.
Trunk Switchhook Flash