Filter
Top Products
• • • • 9 • • • •
Special features
Auto Dial
Auto Dial lets you dial a specific telephone number by pressing a feature key.
To store an Auto Dial number:
1. Without lifting the handset, press
. The associated
flashes.
2. Dial the number.
3. Press
again.
To use Auto Dial:
1. Press a free DN key or lift the handset.
2. Press
. The stored number is dialed automatically.
To display the Auto Dial number:
1. Press
. On an MSL-100, press
Inspect
.
2. Press
. The number is displayed.
3. If you want to clear the display, press
again. On an MSL-100, press
Inspect
.
Automatic Answerback
When Automatic Answerback is activated, your M2616 telephone automatically answers in Handsfree mode
after one ring.
Note:
This feature is not available on the M2008HF.
To activate Automatic Answerback:
1. Press
. The
appears in the LCD display.
Note:
When Automatic Answerback is active, calls are not routed to your voice message service, if provided.
To deactivate Automatic Answerback:
1. Press
again. The
turns off.
Buzz
Two telephones may be linked, allowing one person to notify another person. The person to whom your
telephone is linked hears a “buzz”. Use this feature to indicate a call, a visitor, or a request. This feature is not
available on the MSL-100.
To buzz the person whose telephone is linked to yours:
— Press
The other telephone buzzes as long as you hold down the key.