Filter
Top Products
• • • • 36 • • • •
Special features
Timed Reminder Recall
Timed Reminder Recall rings your telephone after a period of time to remind you of a transferred call
that has not yet been answered. This feature is not available on the MSL-100.
To use the Timed Reminder Recall:
1. During a call in progress, transfer a call by dialing the desired extension, and press .
2. Press again or replace the handset before the extension answers. This starts the
recall timer.
If the person to whom the call is transferred answers, the recall timer stops.
If the transferred call is not answered, your telephone rings.
To Answer a recall:
1. When your telephone rings, pick up the handset or press a DN key. You are connected to the
original caller. The extension to which you transferred the call will continue to ring.
2. Press to repeat the transfer, if desired.
3. If the person to whom you are transferring the call answers while you are on the line, a conference
call is set up between the three of you. Press or replace the handset to complete the
transfer.
Override
You can override a busy/engaged signal and interrupt another call.This feature is called Busy Override
on the MSL-100.
To override a busy/engaged signal:
1. You dial a telephone number and hear busy/engaged signal.
2. Press , or enter the Override FFC. Both persons on the call in progress hear a tone
for approximately one second; the three of you are then connected together. A short tone repeats
every 16 seconds.