Filter
Top Products
• • • • 29 • • • •
Special features
Hot Line
The system administrator can program a Hot Line telephone number that is dialed automatically.
To use Hot Line:
1. Press . The Hot Line number is dialed automatically.
or
If your main line is a Hot Line, lift the handset. The Hot Line number is dialed automatically.
Intercom
You can use the Intercom feature to call a member of your intercom group.
To make an Intercom call:
1. Lift the handset and press .
2. Dial the one- or two-digit code for the intercom group member you wish to call.
To answer an intercom call when you are on a line other than your intercom group line:
1. Press to put the current call on hold, or press to terminate the call.
2. Press and begin speaking.
Make Busy
Make Busy allows you to make your telephone appear busy/engaged to all callers.
To make your telephone appear busy/engaged:
1. Press , or lift the handset and enter the Make Busy FFC.
To receive calls again:
— Press again, or lift the handset and enter the Make Busy FFC.
Malicious Call Trace
Malicious Call Trace provides a way for you to trace nuisance calls within your system.
To trace a call:
1. Answer the call.
2. Press , or enter the SPRE code plus
, or enter the Trace FFC. If you do not
have a button, pressing or will initiate a trace. Keep the
caller on the line to allow time to trace the call. If you pressed or , the
call is taken off hold as soon as it is traced.