Filter
Top Products
• • • • 33 • • • •
Special features
Ring Again
If you receive a busy/engaged signal when trying to reach someone in your office, or in your private
network, Ring Again automatically redials that number and lets you know when that person is free.
To use Ring Again:
1. You dial an extension and receive a busy/engaged signal. Press , or enter the Ring
Again Activate FFC.
2. Replace the handset or press .
3. When the number you want to reach is free, you hear the Ring Again signal.
4. Press a free DN key or lift the handset to obtain a line.
5. Press , or enter the Ring Again Activate FFC to automatically redial the number.
To cancel Ring Again:
— Press .
Ring Again On No Answer
Ring Again on No Answer allows you to automatically redial a number that previously did not answer.
When the person you want to call is busy, your telephone automatically redials the number
immediately when that telephone is available (on-hook).
To use Ring Again on No Answer:
1. You dial an extension and receive no answer.
2. Press , or enter the Ring Again Activate FFC. The lamp lights steadily.
3. Replace the handset or press . You may continue with other calls as needed.
4. The person you called returns to their office and places a call. When they hang up, your telephone
buzzes and the key flashes.
5. Lift your handset or press a free DN key to obtain a line.
6. Upon hearing dial tone, press , or enter the Ring Again Activate FFC.
7. The number is redialed, and goes out.
To cancel Ring Again No Answer:
— Press , or lift the handset and enter the Ring Again Deactivate FFC.
Set-based Administration Enhancements
Many operational procedures and set-based menus have been introduced by this feature that are
beyond the scope of this feature description. For more information on the operation of the Set-based
Administration Enhancements feature, please see Set Based Administration 553-3001-303.