Filter
Top Products
• • • • 32 • • • •
Special features
Radio Paging Automatic Post - selection
You have called another user’s extension, and are receiving either busy/engaged signal or
ringback/ring tone without reply. To page the called party there is no need to make a new call.
The called party is either busy on the telephone or away from the desk.
1. Press
Radio Page
. You hear special dial tone.
2. Enter the Radio Paging Access feature code. You hear ringback/ring tone.
(There is no need to redial the extension number of the called party in order to page them).
Note 1:
While ringback/ring tone is heard, the person you have paged may proceed to any Meridian
extension and enter a Radio Paging Answer code plus their own DN to be connected
directly to you.
Note 2:
If your call is not answered within a preset time period you will hear a continuous high
pitched tone for fifteen seconds, then silence. Hang up and try again later.
Special Features
If you carry a Radio Pager, you will receive a paging indication when another Meridian 1 telephone
user accesses the Radio Paging system and dials your extension DN.
If the Radio Paging system is set up to function in Meet - me mode, you may answer the paging call
from any Meridian 1 extension and be connected to the person who has paged you.
1. Lift the handset of any telephone on the system (as long as it is not a hotline, private line, or a
manual line telephone). You hear dial tone.
2. Enter the Radio Paging Answer feature code. You hear paging tone.
3. Enter your own extension DN. You are connected to the paging caller. If the paging caller has
hung up you will hear a steady high pitched tone - Number Unavailable tone.