Filter
Top Products
Accessing and modifying the LAN Network Settings 27
Accessing and modifying the LAN Network Settings
To configure the IP Phone 1535 with network settings particular to your LAN
environment, you must access and configure the parameters of the Network
Settings option. With the LAN Network connection profile enabled, you can
access and configure the parameters of the Network Settings configuration
options:
Step Action
1
From Main Menu, select Settings > Profile > LAN > Settings >
Network Settings, and press OK to accept.
2
Select the appropr iate configuration options and set network
parameters (specific to your network configuration) for the LAN
connection profile:
Parameter Description
Details Displays the network configuration parameters (MAC address, DHCP, IP address,
Subnet Mask, Gateway and DNS) as currently configured on the IP Phone 1535.
DHCP Used to configure DHCP server information (for DHCP-enabled network
environments) or static IP Address information (for DHCP-disabled network
environments).
DHCP must be disabled to access further configuration options:
• IP Address
• Subnet Mask
• Gateway
• DNS1/DNS2
If you enable DHCP, these options are automatically configured (through the
network DHCP server) after the IP Phone 1535 connects to the network
If manually configuring the DHCP options, the IP Phone 1535 attempts to connect
to the network using the parameters you set. Should a connection failure occurs
when using your manual DHCP values, the IP Phone 1535 retains its current
configuration values. Check your values for correctness and retry the connection.
IP Address View or change network IP address information
Subnet Mask View or change the Subnet mask information
Gateway View or change default Gateway Address information
DNS1/DNS2 View or change the primary (DNS1) and secondary (DNS2) Domain Name
Servers.
Nortel Communications Servers
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 02.03 Standard
Release 4.0/SN10 28 October 2009
Copyright © 2009, Nortel Networks
.