Filter
Top Products
Provision the Communications Server 23
Procedures for installing the IP Phone 1535 for the first time
navigation
•
"Provision the Communications Server" (page 23)
•
"Physically install the IP Phone 1535" (page 24)
•
"Connecting the IP Phone 1535 to the LAN" (page 26)
•
"Enabling the LAN connection profile" (page 26)
• "Accessing and modifying the LAN Network Settings" (page 27)
•
"Enabling the WiFi connection profile" (page 28)
•
"Access and modify Wireless Settings" (page 29)
• "Modifying User Information parameters" (page 30)
•
"Modifying Proxy parameters" (page 31)
•
"Configuring VoIP domain name information" (page 33)
• "Modifying port assignments" (page 33)
•
"Registering the IP Phone 1535" (page 34)
•
"Configuration on a CS 1000 system" (page 37)
Provision the Communications Server
To successfully install or operate the IP Phone 1535 on your network, you
must ensure that you have the following configured:
•
a Communications Server SIP port license is available for each IP
Phone 1535 that you want to install.
•
a preconfigured SIP account for each connected user.
•
an SIP address and Username / Number alias for each user you want
to register.
•
the Communications Server service package has H.263 video enabled.
•
on Communications Server systems without an RTP media portal, the
IgnoreMediaPortalInstertionRules option is checked.
•
if your IP telephony environment does not support for the G.723.1 codec
on all endpoint devices (on the same node), configure the G.723.1
codec to the lowest priority on the IP Phone 1535 to avoid problems with
codec negotiation. For more information, see "Modifying Codec Priority
lists" (page 50).
Nortel Communications Servers
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 02.03 Standard
Release 4.0/SN10 28 October 2009
Copyright © 2009, Nortel Networks
.